The cloning function of the MINI WiFi door controller WG 1 PTA WiFi ref 5193 allows us to transfer users registered locally (via the master card or IR remote control) from one mini WiFi controller to another. To do this, connect the Master controller ...
When pairing the TUYA app with the mini WIFI 5193 controller, it is not possible because it cannot find the device. This is because the controller already has an owner in the app, so to resolve this, you must perform a Wi-Fi reset of the controller. ...
To clone two controllers the process is as follows according to the manual code 97864b V09_19 but it has been detected that the cloning process can take up to 15 minutes, not 3 as indicated in the manual: We will connect the two controllers within ...
1º Have the latest version of the 24661 interface drivers. Download and unzip. DriversInterface24661 or https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads 2º Go to device manager and select the corresponding COM port with ...
Due to a Windows update on 22 June 2023, the program does not recognise the programmer. From that moment on, the software indicated that the programming palette was disconnected. Having the USB of the User-Plus programming palette connected. If the ...
This is an autonomous or centralized access control reader that allows for the opening via a proximity card or key ring. This proximity reader via the configuration of its dipswitches (SW2), may work in autonomous or centralised access control ...
The CA (centralised control access system) permits complex installations with several accesses and additional functions. It also makes it possible to integrate other services. It allows for complete management of an installation with several doors ...