Installation
[WAY-FI PLUS] Automatic photo and video capture
In the Way-fi plus system, you can enable automatic screen capture as a photo or 15-second video when you receive a call. To do this, swipe down on the home screen to access the quick actions menu: As shown in the image above, tapping the Record icon ...
[WAY-FI PLUS] How to perform a reset on the panel and monitor of the Way-Fi Plus kit, ref. 1571.
To perform a reset (factory reset) of the panel and monitor of the Way-Fi Plus kit ref 1571, follow these steps: RESET of the outdoor panel ref. 1573 1-. Disconnect the power supply. 2-. Set Dip switches 1 and 2 to ON. 3-. Power up the system. 4-. ...
[WAY-FI PLUS] Configuration when adding or replacing a panel and/or monitors in a WAY-FI PLUS ref 1571 installation.
If in an installation of the Way-Fi Plus ref 1571 kit we need to add or replace a panel and/or monitor, we must make a record in a database that stores the MASTER panel of the installation. This means that the outdoor panels know who to call and the ...
[WAY-FI PLUS] How to enable the secondary door output on the Way-FI Plus kit monitor.
By default, the monitor of the WAY-FI PLUS kit ref 1571 has the secondary door option disabled. Well, in order to open the door from the monitor it shows the door opening options; main door and secondary door, we must give a time delay that by ...
[WAY-FI PLUS] WAY-FI PLUS KIT Installation Architectures
The Way-Fi Plus kit ref 1571 allows two types of installation: 1-. Cascade installation: this consists of moving the installation of the monitors from one monitor to another. 2-. Installation in bifurcation or star: it is possible to install the ...
How do I create a QR code to open the door when I present it to the Way-Fi Plus panel?
How do I add a WiFi IP camera ref. 9986 through the Way-Fi Plus App?
How do I replace or add a monitor or panel in the Way-Fi Plus kit ref. 1571?
How do I change the opening or activation time of my devices connected to the Way-Fi Plus kit ref. 1571?
By entering the following menu on the monitor you can change the opening time of your devices. Electric lock release time Relay time F1 time (auxiliary device if an auxiliary relay ref. 2013 is wired to the monitor) In 'T' mode pressing F1 activates ...
How do I adjust the tunes on my Way-Fi Plus ref. 1572 monitor?
What are the technical characteristics of the door station ref. 1573?
Is my WAY board or monitor compatible with the Way-Fi Plus kit?
No, no Way equipment is compatible with the 1571 kit. WAY 1401 and 1402 kits are not compatible with the Way-Fi Plus kit.