1º Have the latest version of the 24661 interface drivers. Download and unzip. DriversInterface24661 or https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads 2º Go to device manager and select the corresponding COM port with ...
Due to a Windows update on 22 June 2023, the program does not recognise the programmer. From that moment on, the software indicated that the programming palette was disconnected. Having the USB of the User-Plus programming palette connected. If the ...
This is an autonomous or centralized access control reader that allows for the opening via a proximity card or key ring. This proximity reader via the configuration of its dipswitches (SW2), may work in autonomous or centralised access control ...
This operation is carried out by electrically modifying the equipment, with the aim of restricting anyone without physical access to the equipment from modifying it in any way. Steps: 1. Disconnect the power supply. 2. Press the open door button from ...
Programming may be done 3 different ways. Master Card: The first time you connect the power, the system waits for the proximity card to be presented and considered as “Master Card”. Private Programming Keypad ref. 2306: This MANUAL programming ...
To use personal proximity cards, the private proximity card reader must be activated. To activate the reader the MASTER card must be programmed. This is the card which is subsequently used to access the programming functions. Once the reader is ...
The CA (centralised control access system) permits complex installations with several accesses and additional functions. It also makes it possible to integrate other services. It allows for complete management of an installation with several doors ...
There are several technologies, depending on the type of interaction between the identifier and the reader. KEYPAD The identifier is not material, since it is memorised by the user. The code must be entered into a keypad. This is the least expensive ...
The software that manages an access control installation with fingerprint readers from a PC is Singular Key SW. It is included in the CD together with the reader, even though it can also be downloaded from www.fermax.com.