DESFIRE
Do MIFARE 5296, 6957 or 5225 readers support Desfire cards?
A Fermax resistant de prox 5296 or 6957 reader and the AC-MAX 5225 fingerprint reader also read FERMAX Desfire cards. Desfire cards, like Mifare cards, have a UID serial number that is openly accessible. This code is read by readers that do not use ...[DESFIRE] Proximity reader DESFIRE NOT compatible with EM Programming Keypad ref. 2306
As a result of an incident we have detected that we have an error in the manual of the DESFIRE 7463 proximity reader, in the autonomous manual code 970206 V01_21 as it indicates that it is compatible with the programming keyboard REF. 2306 and it is ...[5276] Transfer user information time between MINI controllers ref. 5276
To clone two controllers the process is as follows according to the manual code 97864b V09_19 but it has been detected that the cloning process can take up to 15 minutes, not 3 as indicated in the manual: We will connect the two controllers within ...[24661] Update firmwares and configure the Interface according to the equipment to which you connect it.
1º Have the latest version of the 24661 interface drivers. Download and unzip. DriversInterface24661 or https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads 2º Go to device manager and select the corresponding COM port with ...[USERPLUS SOFT] 5258 Programming palette was disconected.
Due to a Windows update on 22 June 2023, the program does not recognise the programmer. From that moment on, the software indicated that the programming palette was disconnected. Having the USB of the User-Plus programming palette connected. If the ...What is a Skyline Proximity Reader ref. 7440 and what are its general characteristics?
This is an autonomous or centralized access control reader that allows for the opening via a proximity card or key ring. This proximity reader via the configuration of its dipswitches (SW2), may work in autonomous or centralised access control ...How do you replace a master card if you lose or change the previous one in a Cityline Proximity Reader (configured as autonomous) ref. 6992 or Marine Proximity Reader (configured as autonomous) ref. 5472 or Skyline Proximity (configured as autonomous) ref. 7440?
This operation is carried out by electrically modifying the equipment, with the aim of restricting anyone without physical access to the equipment from modifying it in any way. Steps: 1. Disconnect the power supply. 2. Press the open door button from ...How do you program the Cityline Proximity Reader (configured as autonomous) ref. 6992 or Skyline Proximity Reader (configured as autonomous) ref. 7440 or Private CityClassic ref. 2347 or Private Loft ref. 4530 or Marine Proximity Reader (configured as autonomous) ref. 5472?
Programming may be done 3 different ways. Master Card: The first time you connect the power, the system waits for the proximity card to be presented and considered as “Master Card”. Private Programming Keypad ref. 2306: This MANUAL programming ...What steps must I take to start up the Cityline Proximity Reader (configured as autonomous) ref. 6992 or Marine Proximity Reader (configured as autonomous) ref. 5472 or Skyline Proximity (configured as autonomous) ref. 7440?
To use personal proximity cards, the private proximity card reader must be activated. To activate the reader the MASTER card must be programmed. This is the card which is subsequently used to access the programming functions. Once the reader is ...What do you mean by centralised access controls and when do you recommend using them?
The CA (centralised control access system) permits complex installations with several accesses and additional functions. It also makes it possible to integrate other services. It allows for complete management of an installation with several doors ...What type of access control readers does Fermax have working with what technology?
There are several technologies, depending on the type of interaction between the identifier and the reader. KEYPAD The identifier is not material, since it is memorised by the user. The code must be entered into a keypad. This is the least expensive ...What software manages an access control installation with fingerprint readers city from a PC?
The software that manages an access control installation with fingerprint readers from a PC is Singular Key SW. It is included in the CD together with the reader, even though it can also be downloaded from www.fermax.com.
Find manuals, technical books, tender specifications and much more on our professional website.