[WAY-FI PLUS] How to enable the secondary door output on the Way-FI Plus kit monitor.
By default, the monitor of the WAY-FI PLUS kit ref 1571 has the secondary door option disabled. Well, in order to open the door from the monitor it shows the door opening options; main door and secondary door, we must give a time delay that by default is configured as 00 indicating that this output is disabled.
In order to activate the secondary door icon, we must access the different monitor settings, specifically the “Timings” option, by sliding the main screen of the monitor to the left.
The selected timing can be checked by clicking on each icon, which will cause the corresponding device to be activated.
Related Articles
[WAY-FI PLUS] WAY-FI PLUS KIT Installation Architectures
The Way-Fi Plus kit ref 1571 allows two types of installation: 1-. Cascade installation: this consists of moving the installation of the monitors from one monitor to another. 2-. Installation in bifurcation or star: it is possible to install the ...[WAY-FI PLUS] WAY-FI PLUS 7" 1L WAY-FI PLUS kit outdoor panel configuration ref 1571 for replacement.
If in the WAY-FI PLUS kit ref 1571 we have to replace the outdoor panel ref 1573 we have to configure the dip-switches: 1. The dip-switch 1 has to be set as MASTER (ON). 2. The dip-switch 2 has to be set as PANEL 1 (ON). In addition, the tamper ...Is my WAY board or monitor compatible with the Way-Fi Plus kit?
No, no Way equipment is compatible with the 1571 kit. WAY 1401 and 1402 kits are not compatible with the Way-Fi Plus kit.INTEGRATION WITH DIGITAL ASSISTANTS
[FRANÇAIS] [DEUTSCH] [ITALIANO] [POLSKI] [PORTUGUES]What is the part number of the additional IP camera in the Way-Fi Plus kit?
The IP camera compatible with the Way-Fi Plus kit is ref. 9986 and up to 4 IP cameras can be connected either by Ethernet or Wifi.
Find manuals, technical books, tender specifications and much more on our professional website.