In MeetMe how can I visualise external cameras already configured in the call panel?

In MeetMe how can I visualise external cameras already configured in the call panel?

It is possible to configure the display of up to 4 external cameras already configured in the call panel, as it occurs with the MEETmonitor during a call.

Under Home settings (gear icon) > External cameras, select the camera number to enable the option.

This option will be available during the call.

During the call, press the panel icon. This will display a drop-down menu with the enabled cameras, and you can select the desired one so that the image shown in the call changes to the one coming from that camera.


(*) CCTV cameras are not available via the app (feature coming soon).
    • Related Articles

    • [MEET KIT] If you have more than one street panel

      To activate the additional panels, we need to check the following points: The street panels and monitors installed must be on the same physical network and have the same IP address. All panels will be configured as 1W PANEL, and both the monitor(s) ...
    • How can I invite another person to my MeetMe home to share call forwarding?

      The user settings are available in the Dwelling settings (gear icon) > Guest users. Please note that only the owner of the dwelling, i.e. the user who has entered the MeetMe licence data, can invite other users. If a new user enters the licence data, ...
    • [MEET KIT] Start-up and configuration with the MeetMe app

      To start up the MEET Kit ref. 1506, 1507 or 1508, follow these steps: Check that it is installed as shown in the image and that the recommended distances between the switch and the devices are not exceeded If the installation is wired as shown in the ...
    • How to migrate from the old app MeetMe to the new one?

      Before migrating, please consult your country availability in the following article: Country availability of the new MeetMe app The new MeetMe app is available from 4 December and requires the resetting of the outdoor panels and guard unit. In order ...
    • [MEET] If you do not receive a call from the monitor

      To resolve the issue, we need to check the following points: The panel and monitor(s) must be connected to the same router and the IP addresses assigned to them must be within the router's address range. If the panel is configured as a block panel, ...

    Find manuals, technical books, tender specifications and much more on our professional website.

       
      Fermax International Distribution Network.