SIP panel integration: Port configuration with Meet server and door opening with the new MeetMe App

SIP panel integration: Port configuration with Meet server and door opening with the new MeetMe App

Port configuration with the new Meet server

After migrating to the new MeetMe app, with the SIP panel we have to look at which transport protocol they use.
  1. With UDP, the port is the same (5060) and just needs to be reset.
  2. With TCP (default option), the port must be changed to 5223.
  3. With TLS, the port must be changed to 4443.

UDPTCPTLS
Old Meet server506050605223
New Meet server506052234443

You will need to log into the webserver and change the port settings depending on whether you use TCP or TLS.



Opening the door with the new MeetMe app

Main door opening

In order to unlock with the new app, it is necessary to have Security Settings > Output Settings > Select the desired output (Output1/Output2) > Trigger by SMS > unlock_main activated.

Since firmware 5.8 it is activated by default. You can download the firmware file from the product sheet on the fermax.com website.



Secondary door opening

Additionally, if we want to control the second SIP board relay we will have to repeat the steps for Output 2, using in this case the SIP message "unlock_sec".



    • Related Articles

    • [MEET KIT] Start-up and configuration with the MeetMe app

      To start up the MEET Kit ref. 1506, 1507 or 1508, follow these steps: Check that it is installed as shown in the image and that the recommended distances between the switch and the devices are not exceeded If the installation is wired as shown in the ...
    • [MEET] Connection for door lock

      To open the door from your MEET Kit ref. 1506, 1507, or 1508, you have a potential-free contact to open the door depending on the type of door: Door with a latch that has an electric door opener on the frame. There are different formats and they can ...
    • [MEET KIT] If you have more than one street panel

      To activate the additional panels, we need to check the following points: The street panels and monitors installed must be on the same physical network and have the same IP address. All panels will be configured as 1W PANEL, and both the monitor(s) ...
    • [MEET] Start-up of board with license 1496, without MEET monitor

      To configure your door panel to make calls to your smartphone, make sure it meets the following requirements. You must have two licences, one must be stuck to the back of the MEET panel and the other must be (ref. 1496 MEET ME CALL DIVERT LICENSE ...
    • At MeetMe, can I see or open the door even if I am not called?

      Yes, you can open the door directly from the main view without activating the outdoor panel's camera first. To do this, you first need to add the outdoor's panel as a contact in the app. To be able to do so, follow the steps below: 1. Wait for a call ...

    Find manuals, technical books, tender specifications and much more on our professional website.

       
      Fermax International Distribution Network.