[SEE-U] How do I add guests to my SEE-U WiFi video installation?
On see-u it is not possible to invite users through the application but it is possible to pair the mobile phones in the house knowing the access password that was entered by the first mobile phone that was paired.
If you don't remember the password, you will have to reset the wifi on the housing monitor and reconnect it to the same wifi with internet access.
Once this is done, you will have to re-pair all the mobiles you want using the pairing QR code on the monitor.
Remember that both the housing monitor and the mobiles you want to pair must be connected to the same 2.4G wifi
Go to the monitor menu by tapping the screen and access the WIFI menu
The following appears
That will allow scanning from the application and will ask us for the password.
Enter a name and press next.
The mobiles will receive the call at the same time but only the first one to accept the call will see the video and will be able to answer and communicate with the video door entry system.
Related Articles
[SEE-U WIFI] How to modify the opening time on a VIDEO SEE-U WIFI KIT 7” 1L REF 1393.
The VIDEO SEE-U WIFI KIT 7’ 1L REF 1393 allows us to modify the door opening time and the relay opening time (gate opening) through the monitor. To do this, we will follow the steps below: 1-. Turn on the monitor screen. Touching the screen activates ...[SEE-U] How to enable the CCTV camera in the SEE-U kit ref 1391.
The SEE-U kit panel allows us to connect an analogue aerial camera between the CCTV and GND terminals. Once the aerial camera has been installed on the outdoor panel, it must be enabled on the monitor, as it is disabled by default. The image of the ...[SEE-U WIFI] How to reset the administrator password in the SEE-U WIFI app
During pairing, the SEE-U app prompts you to enter an administrator password, which you will need to enter again later if you want to add more devices. If you have forgotten the password, you will need to pair the monitor again, which will also reset ...[SEE-U WIFI] Automatic image capture activation in the SEE-U WIFI kit ref 1393
To activate automatic image capture on the SEE-U WIFI kit ref 1393, when a call is received on the monitor, follow these steps: When you touch the screen, it activates and shows you the different monitor options. At the top of the screen there is a ...How do I add an additional monitor or board to my see-u kit?
Below you can see how we would add an additional monitor or board. It is allowed to have with the kit up to 4 cascaded monitors including the one in the kit. The intermediate monitors will be configured like this and will be configured in the ...
Find manuals, technical books, tender specifications and much more on our professional website.