Can I use the existing door opener from my old door entry system to connect it to the see-u kit?
f the electric lock release that you had installed when opening the door sounded like a buzzer, it means that it is an AC electric lock release (12Vac/ac), so you cannot use the +s-s output connections directly to the electric lock release, but you will have to either add a relay ref. 2013 or wire it through the auxiliary relay contact on the outdoor panel, maintaining the existing AC source of the electric lock release.
The installation would be as follows. As the electric lock release is of normal operation (only when it has voltage it opens) you must verify that JP1 is set to NO (Normally open).
Related Articles
[SEE-U WIFI] How to modify the opening time on a VIDEO SEE-U WIFI KIT 7” 1L REF 1393.
The VIDEO SEE-U WIFI KIT 7’ 1L REF 1393 allows us to modify the door opening time and the relay opening time (gate opening) through the monitor. To do this, we will follow the steps below: 1-. Turn on the monitor screen. Touching the screen activates ...Which door release can I connect to the see-u kit?
The electric lock release must be of low consumption direct current, less than 250mA Fermax recommends ref. 29588 DOOR OPENER 300N-412-S if the grille or entrance door has a bolt entry, you must change the trim plate of the electric lock release and ...Which SEE-U kit models are available?
We have both the SEE-U WIFI Kit REF. 1393 and the See-u NO WIFI Kit REF. 1391 are distinguished by the monitor included in the kit. Both use the same outdoor panel and accessories but the monitor is different. WIFI Kit - WIFI Monitor ref. 1394 Kit NO ...How do I add an additional monitor or board to my see-u kit?
Below you can see how we would add an additional monitor or board. It is allowed to have with the kit up to 4 cascaded monitors including the one in the kit. The intermediate monitors will be configured like this and will be configured in the ...Is my way-fi kit or way kit compatible with the see-u?
No. They are not compatible with each other even if they seem to belong to the same product family. Only see-u devices are compatible with each other. SEE-U board with a see-u wifi and see-u non-wifi monitor can be installed in the same installation.
Find manuals, technical books, tender specifications and much more on our professional website.