Can I remotely manage the settings and parameters of the outdoor panel?
It is possible to modify the settings of the Connect outdoor panels remotely from MyConnect, without the need to physically access the device (Skyline and Marine) or use the local webserver (Cora).
Some of these parameters are:
- Modify opening parameters: such as hanging after opening or the duration of the opening and sensor.
- Modify audio levels and voice synthesis: such as call volume, conversation or "Door open" voice synthesis.
- Manage access control: add, edit or delete residents, access codes, proximity cards and personalised data.
- Modify video zoom: modify the camera focus area.
You can adapt the configuration to the needs of each moment, from anywhere.
Do portal settings or manual settings dominate?
With Connect Skyline/Marine amplifiers, which allow physical configuration via potentiometer or dip switch, you can define which configuration will take priority:
• Manual (physical): settings made directly on the amplifier.
• Digital (MyConnect portal): settings applied from the portal.
If you select digital dominance in MyConnect, any manual changes you make to the amplifier will have no effect.
Before going to installation, make sure to switch back to manual mode if you want the physical settings to be applied.
Related Articles
How can I add codes or identifiers remotely?
With the Cora panel, it is possible to modify your agenda remotely from MyConnect. In the agenda you can modify multiple functionalities that allow an advanced and personalised management of the registered users. To be able to modify, add or delete ...When should I register the installation on MyConnect? Is it necessary to register all outdoor panels?
You can register your installation at any time on the portal. You will be able to view the details of the installation once the installation has been consolidated and at least all the panels have been installed and configured in their final position. ...Why are some devices not showing up in the installation or are disconnected?
If after 48 hours some devices still do not appear in the installation or appear as ?disconnected, check the following possible causes: • Lack of synchronisation. if the installation has not been idle long enough or the nightly synchronisation ...
Find manuals, technical books, tender specifications and much more on our professional website.