[DUOX PLUS] Amplifier máximum current output of accessories 250mA

[DUOX PLUS] Amplifier máximum current output of accessories 250mA

The DUOX PLUS amplifier has several power outputs supplying 12Vdc.

      - A maximum current output of 250mA is available for accessories.
                  Connections CN1, CN2, CN3. The sum of all outputs must be a maximum of 250mA.     
                  Maximum consumption of the different accessories:
                              -One to One module 20mA
                              -Display module 150mA
                              -Panoramic card module W 45 mA
                              -Panoramic Card Module V 25mA
                              -8 Push Button Module W 15mA


       - For electric lock release it has an exclusive output of 250mA maximum.
                  Terminal +12V

  

The connection of up to 5 panoramic modules is recommended. See consumption according to the modules connected. They must never exceed 250mA.
If the consumption exceeds this, add an additional power supply ref. 4813 12Vdc/2A DIN 6 POWER SUPPLY intercepting the + and -
(red and black wires of the connector between additional modules).


    • Related Articles

    • [DUOX PLUS] Amplifier

      Below you can download the new Duox Plus quick guide in PDF format: 970270Ic Duox Plus System Quick Guide V12_23 970303I DUOX PLUS Installation and Programming Guide V01_24 DUOX PLUS AMPLIFIER Color video amplifier module, to be incorporated in video ...
    • [DUOX PLUS] SPARE PART PVT09375 Microphone amplifier MARINE

      Step by step instruction on how to replace the microphone of a MARINE DUOX PLUS amplifier. 1. First of all, unscrew the clamps using four hexagonal tubes which hold the amplifier to the plate. Remove the cable clamps and disconnect any connectors or ...
    • [DUOX PLUS] Spare part PVT09374 CITY MICROPHONE SET AMP. DUOX PLUS

      Step-by-step instructions on how to replace the microphone of a CITY/SKYLINE DUOX PLUS amplifier. Remove the front of the board with the help of the three side tabs. Use a flat screwdriver to pry it off, being careful not to deform the aluminium. 2. ...
    • How can I change the melody of the monitor?

      The monitor allows for selection of different melodies for the panels, the guard unit and the doorbell. You may assign up to 6 different melodies. To change the monitor's melody, press the menu button from the monitor, go to settings and select the ...

    Find manuals, technical books, tender specifications and much more on our professional website.

       
      Fermax International Distribution Network.