[MEET] KIN 1L panel settings to call the concierge.

In this guide we will find the settings that must be configured in the KIN panel to call exclusively to a concierge desk and making a call as a KIN 1L panel. Remember that the IP's of the devices must be previously configured, they must have internet access and have the licenses registered in the SIP option. The main reason for this is to have also the facial recognition feature in the KIN panel.

Panel Settings.

GENERAL Option

Set the panel as 1W Panel and assign Block, Apartment and Device number. Additionally, modify the Concierge option to Zero (0).

SIP Option

The Stun Port is changed to zero (0) and the rest of the necessary configurations for SIP activation. Once it is configured, we save and enable the Enable SIP option:

SIP CALL Option

To enable the panel to call the concierge, you have to download the CSV file and assign the apartment and the number cell. As in the GENERAL section we have assigned the Apartamento 1, we have to assign the Apartment 1000001 and in the Number cell fill with the licence sip:0123456@sip.fermax.com.

Exporting CSV file

Modifying the CSV File

Note: It is recommended to open the CSV file in a notepad for the changes to be made correctly.

Importing CSV file

After saving the file, in the SIP option of the panel, select the CSV file that has been modified and click on the IMPORT button. A confirmation window will appear, and the modified configurations will be established.

Then, there will appear the data imported from the CSV File:

Concierge Settings

General Options.

In the GENERAL option, it is assigned as Block Concierge. In the case of the REF F95391 guard unit, activate the Backward Compatibility checkbox.

Previously, the respective settings are made in the SIP option.

With these settings, the KIN panel will be able to call the concierge directly.

Related Articles
[MEET KIT] If you have more than one street panel
To activate the additional panels, we need to check the following points: The street panels and monitors installed must be on the same physical network and have the same IP address. All panels will be configured as 1W PANEL, and both the monitor(s) ...
How to add users with Face Recognition on MEET badges?
[MEET] FACE RECOGNITION In all our series of MEET panels (Marine, Kin and Milo) we have the face recognition function to control access to our installation, providing greater comfort to our users. CAPABILITIES: UP TO 6000 USERS. 6000 USER ...
[MEET] Start-up of board with license 1496, without MEET monitor
To configure your door panel to make calls to your smartphone, make sure it meets the following requirements. You must have two licences, one must be stuck to the back of the MEET panel and the other must be (ref. 1496 MEET ME CALL DIVERT LICENSE ...
[MEET KIT] Start-up and configuration with the MeetMe app
To start up the MEET Kit ref. 1506, 1507 or 1508, follow these steps: Check that it is installed as shown in the image and that the recommended distances between the switch and the devices are not exceeded If the installation is wired as shown in the ...
[MEET] If you do not receive a call from the monitor
To resolve the issue, we need to check the following points: The panel and monitor(s) must be connected to the same router and the IP addresses assigned to them must be within the router's address range. If the panel is configured as a block panel, ...