[MEET KIT] If you have more than one street panel
To activate the additional panels, we need to check the following points:
- The street panels and monitors installed must be on the same physical network and have the same IP address.
- All panels will be configured as 1W PANEL, and both the monitor(s) and the panels must be in the same block number and apartment number.
- Below we see the configuration of two 1-line MEET panels. Both are in Block 1 and apartment number 101, where we changed the equipment number and its TAG (name) to identify it.


- We can have up to 9 panels configured with the same apartment number, but the device number must be different from the other panels.
- Remember that each panel must have a different IP within the network range. We choose the available address as explained in the following video.
Related Articles
[MEET] Connection for door lock
To open the door from your MEET Kit ref. 1506, 1507, or 1508, you have a potential-free contact to open the door depending on the type of door: Door with a latch that has an electric door opener on the frame. There are different formats and they can ...
[MEET KIT] If you have more than one MEET monitor connected to the Kit
To get started, we need to check the monitor settings by following these steps: The panels and monitors must be on the same physical network and have the same IP address. In the monitor's general menu, the main monitor is named 0 and this is the one ...
How to add users with Face Recognition on MEET badges?
[MEET] FACE RECOGNITION In all our series of MEET panels (Marine, Kin and Milo) we have the face recognition function to control access to our installation, providing greater comfort to our users. CAPABILITIES: UP TO 6000 USERS. 6000 USER ...
[MEET] Start-up of board with license 1496, without MEET monitor
To configure your door panel to make calls to your smartphone, make sure it meets the following requirements. You must have two licences, one must be stuck to the back of the MEET panel and the other must be (ref. 1496 MEET ME CALL DIVERT LICENSE ...
[MEET KIT] Start-up and configuration with the MeetMe app
To start up the MEET Kit ref. 1506, 1507 or 1508, follow these steps: Check that it is installed as shown in the image and that the recommended distances between the switch and the devices are not exceeded If the installation is wired as shown in the ...
Find manuals, technical books, tender specifications and much more on our professional website.
Fermax International Distribution Network.