[MEET KIT] If you have more than one MEET monitor connected to the Kit

[MEET KIT] If you have more than one MEET monitor connected to the Kit

To get started, we need to check the monitor settings by following these steps:

  • The panels and monitors must be on the same physical network and have the same IP address.
  • In the monitor's general menu, the main monitor is named 0 and this is the one we will later pair with the MeetMe app.           
  • The rest of the monitors will belong to the same block and apartment, indicating a different monitor number.
  1. We can add up to 10 monitors by changing the monitor number. 
  2. Remember that you can find help in the following video.

    • Related Articles

    • [MEET] If you do not receive a call from the monitor

      To resolve the issue, we need to check the following points: The panel and monitor(s) must be connected to the same router and the IP addresses assigned to them must be within the router's address range. If the panel is configured as a block panel, ...
    • [MEET] Start-up of board with license 1496, without MEET monitor

      To configure your door panel to make calls to your smartphone, make sure it meets the following requirements. You must have two licences, one must be stuck to the back of the MEET panel and the other must be (ref. 1496 MEET ME CALL DIVERT LICENSE ...
    • [MEET KIT] Start-up and configuration with the MeetMe app

      To start up the MEET Kit ref. 1506, 1507 or 1508, follow these steps: Check that it is installed as shown in the image and that the recommended distances between the switch and the devices are not exceeded If the installation is wired as shown in the ...
    • [MEET KIT] If you have more than one street panel

      To activate the additional panels, we need to check the following points: The street panels and monitors installed must be on the same physical network and have the same IP address. All panels will be configured as 1W PANEL, and both the monitor(s) ...
    • [MEET] Connection for door lock

      To open the door from your MEET Kit ref. 1506, 1507, or 1508, you have a potential-free contact to open the door depending on the type of door: Door with a latch that has an electric door opener on the frame. There are different formats and they can ...

    Find manuals, technical books, tender specifications and much more on our professional website.

       
      Fermax International Distribution Network.