How can I reset the Meet outdoor panel?
To complete the migration of the app and ensure the correct functioning of the new app, it is necessary to perform a restart of the outdoor panels and guard units (if any). Below you will find the options available to carry out this restart:
- From the outdoor panel's webserver (if you have access): you will need to know the access password configured by the installer, the webserver can be accessed through the IP of the outdoor panel, with a browser such as Chrome.
- If the outdoor panel is PoE (powered by RJ45 connected to the switch): simply disconnect the network cable to cut the power and proceed with the reboot.
- From the switch dedicated to the video door entry system in the electrical panel: you can perform the restart by turning this switch off and on.
If you prefer, you can also contact your installer, your building administrator or official Fermax Service in your area.
Related Articles
[MEET KIT] If you have more than one street panel
To activate the additional panels, we need to check the following points: The street panels and monitors installed must be on the same physical network and have the same IP address. All panels will be configured as 1W PANEL, and both the monitor(s) ...[MEET] Connection for door lock
To open the door from your MEET Kit ref. 1506, 1507, or 1508, you have a potential-free contact to open the door depending on the type of door: Door with a latch that has an electric door opener on the frame. There are different formats and they can ...How to add users with Face Recognition on MEET badges?
[MEET] FACE RECOGNITION In all our series of MEET panels (Marine, Kin and Milo) we have the face recognition function to control access to our installation, providing greater comfort to our users. CAPABILITIES: UP TO 6000 USERS. 6000 USER ...[MEET] Start-up of board with license 1496, without MEET monitor
To configure your door panel to make calls to your smartphone, make sure it meets the following requirements. You must have two licences, one must be stuck to the back of the MEET panel and the other must be (ref. 1496 MEET ME CALL DIVERT LICENSE ...SIP panel integration: Port configuration with Meet server and door opening with the new MeetMe App
Port configuration with the new Meet server After migrating to the new MeetMe app, with the SIP panel we have to look at which transport protocol they use. With UDP, the port is the same (5060) and just needs to be reset. With TCP (default option), ...
Find manuals, technical books, tender specifications and much more on our professional website.