How do you replace a master card if you lose or change the previous one in a Cityline Proximity Reader (configured as autonomous) ref. 6992 or Marine Proximity Reader (configured as autonomous) ref. 5472 or Skyline Proximity (configured as autonomous) ref. 7440?
This operation is carried out by
electrically modifying the equipment, with the aim of restricting anyone
without physical access to the equipment from modifying it in any way.
Steps:
1. Disconnect the power supply.
2. Press the open door button from the inside (if installed) or temporarily cut the circuit between the "B" and "-" terminals on the reader controller. Connect the power supply
3. The reader goes into "Changing MASTER Card Mode". All the reader's indicators start to flash for 5 seconds. Any card swiped by the reader during this time will be taken to be the new MASTER card.
Notes:
- The card swiped does not have to be a card already registered as a personal card.
- If the card swiped is that already set up as the MASTER two things may occur:
- If the output button remains activated it will be deleted.
- If the output button is not activated, the reader will remain configured with its factory settings: without a Master, without user cards and with the default times set.
It will be clear that the Master card and all the data has been deleted as the green indicator led will continuously flash until the power supply is disconnected.
Once reconnected, the reader will be deactivated, that is awaiting the setup of a new MASTER card.
The reader will return to normal mode from any programming mode if a card has not been presented within 30 seconds.Related Articles
How do you program the Cityline Proximity Reader (configured as autonomous) ref. 6992 or Skyline Proximity Reader (configured as autonomous) ref. 7440 or Private CityClassic ref. 2347 or Private Loft ref. 4530 or Marine Proximity Reader (configured as autonomous) ref. 5472?
Programming may be done 3 different ways. Master Card: The first time you connect the power, the system waits for the proximity card to be presented and considered as “Master Card”. Private Programming Keypad ref. 2306: This MANUAL programming ...What is a Skyline Proximity Reader ref. 7440 and what are its general characteristics?
This is an autonomous or centralized access control reader that allows for the opening via a proximity card or key ring. This proximity reader via the configuration of its dipswitches (SW2), may work in autonomous or centralised access control ...[DESFIRE] Proximity reader DESFIRE NOT compatible with EM Programming Keypad ref. 2306
As a result of an incident we have detected that we have an error in the manual of the DESFIRE 7463 proximity reader, in the autonomous manual code 970206 V01_21 as it indicates that it is compatible with the programming keyboard REF. 2306 and it is ...[AC-MAX] What maximum distance can I have between the furthest reader and the controller if it is fingerprint or wiegand?
If the reader is an AC-MAX fingerprint reader ref. 5225 this reader is connected to the controller by RS-485, therefore up to 1200m, but additionally, it must be considered that it is also connected by Ethernet, therefore it will have to have a ...[AC-MAX] Is my 5204 AC-MAX USB reader compatible with DESFIRE identifiers?
No, since the USB reader, just like a RESISTANT would do, only reads the UID of the card, not the code encrypted in the identifier. In the case of DESFIRE identifiers, we can only register the identifiers in AC-MAX either manually with the serigraphy ...