How do you program the Cityline Proximity Reader (configured as autonomous) ref. 6992 or Skyline Proximity Reader (configured as autonomous) ref. 7440 or Private CityClassic ref. 2347 or Private Loft ref. 4530 or Marine Proximity Reader (configured as autonomous) ref. 5472?
Programming may be done 3 different ways.
- Master Card: The first time you connect the power, the system waits for the proximity card to be presented and considered as “Master Card”.
- Private Programming Keypad ref. 2306: This MANUAL programming keypad is usually used for maintenance services. This keypad is normally used to manually unregister a stolen card from the reader itself. You can also carry out all of the programming operations using a few simple commands.
- WINPROX PC Programming software: For maintenance service and information management in Private autonomous systems. This allows you to upload and receive complete user information from the reader. This can be downloaded from the Fermax website. The Winprox application allows you to manage autonomous proximity readers, users and cards, online incident control, generate reports, etc… from an access control installation, easily and intuitively. With Winprox you can define many access readers, register or unregister users, assign various cards to a single user, configure the access permits to each user via different readers in the installation, manage the cards expiration dates, export/import user list from Excel files, etc.
Related Articles
How do you replace a master card if you lose or change the previous one in a Cityline Proximity Reader (configured as autonomous) ref. 6992 or Marine Proximity Reader (configured as autonomous) ref. 5472 or Skyline Proximity (configured as autonomous) ref. 7440?
This operation is carried out by electrically modifying the equipment, with the aim of restricting anyone without physical access to the equipment from modifying it in any way. Steps: 1. Disconnect the power supply. 2. Press the open door button from ...What is a Skyline Proximity Reader ref. 7440 and what are its general characteristics?
This is an autonomous or centralized access control reader that allows for the opening via a proximity card or key ring. This proximity reader via the configuration of its dipswitches (SW2), may work in autonomous or centralised access control ...[DESFIRE] Proximity reader DESFIRE NOT compatible with EM Programming Keypad ref. 2306
As a result of an incident we have detected that we have an error in the manual of the DESFIRE 7463 proximity reader, in the autonomous manual code 970206 V01_21 as it indicates that it is compatible with the programming keyboard REF. 2306 and it is ...[AC-MAX] What maximum distance can I have between the furthest reader and the controller if it is fingerprint or wiegand?
If the reader is an AC-MAX fingerprint reader ref. 5225 this reader is connected to the controller by RS-485, therefore up to 1200m, but additionally, it must be considered that it is also connected by Ethernet, therefore it will have to have a ...[AC-MAX] 5225 Do we have a desktop reader to register fingerprints in AC-MAX?
There is no exclusive reference for that. It is possible to use the same reference 5225 FPAC-MAX FINGERPRINT READER as our fingerprint reader by adding a 4813 source so that it can be installed next to the PC where the AC-MAX software is for ...
Find manuals, technical books, tender specifications and much more on our professional website.