Error when starting or running the software (missing DLL)
If after following the installation steps, the watchdog or Meet Management Software does not start correctly and shows missing DLL errors ("system error", "code execution could not continue" or "failed to start application"), you need to install the following Microsoft C++ packages:
- Microsoft Visual C++ 2015 Redistributable Update 3
vcredist_x64
vcredist_x86 - Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package
vcredist_x64
vcredist_x86 - Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package
vcredist_x64
vcredist_x86
Related Articles
How to add users with Face Recognition on MEET badges?
[MEET] FACE RECOGNITION In all our series of MEET panels (Marine, Kin and Milo) we have the face recognition function to control access to our installation, providing greater comfort to our users. CAPABILITIES: UP TO 6000 USERS. 6000 USER ...[MEET] Connection for door lock
To open the door from your MEET Kit ref. 1506, 1507, or 1508, you have a potential-free contact to open the door depending on the type of door: Door with a latch that has an electric door opener on the frame. There are different formats and they can ...[MEET] Installations with distances greater than 100 metres between devices
When there are distances greater than 100 meters between devices in your MEET Kit ref 1506, 1507, or 1508, the following steps must be followed: Check that it is installed as shown in the image and that the recommended distances between the switch ...[MEET] Start-up of board with license 1496, without MEET monitor
To configure your door panel to make calls to your smartphone, make sure it meets the following requirements. You must have two licences, one must be stuck to the back of the MEET panel and the other must be (ref. 1496 MEET ME CALL DIVERT LICENSE ...[MEET KIT] If you have more than one street panel
To activate the additional panels, we need to check the following points: The street panels and monitors installed must be on the same physical network and have the same IP address. All panels will be configured as 1W PANEL, and both the monitor(s) ...
Find manuals, technical books, tender specifications and much more on our professional website.