Error code 1 pairing
This error means that the app was unable to connect to the access point of the monitor when displaying the QR code.
1. First of all, check that a valid MAC is displayed under the QR code in the pairing menu of the monitor.
2. Accept the prompt that will appear on your smartphone to connect to the monitor's access point. Make sure your smartphone can connect to non-Internet and/or unknown WIFI networks from your system settings, or you can also try pairing with another smartphone.
3. If it still fails or the promt does not appear, reset the monitor. To do this, remove it from the wall, wait 10 seconds and plug it back in.
To remove the monitor from the wall, hold the monitor firmly on both sides with your hands at the lowest part and use a little force to pull it away from the wall, wait 10 seconds and reconnect it as shown in the picture below:
If your monitor is a different model, the process is the same.
4. Try using a different smartphone to pair the monitor. The paired home is saved in the app account, so you can then access your home with your initial smartphone or from any other smartphone.
Related Articles
Error code 417 pairing (update required to continue)
Link to video The monitor needs to update its firmware version in order to pair. To do this, we need to access the special administrator menu, following the steps in the app. 1. Press the MENU button to turn on the monitor screen. 2. Once in the ...How do I reset or change the monitor's WIFI settings?
If you want to disconnect your terminal from the internet, delete the home in the app in Settings > Home tab > Delete home. This will cause you to lose the pairing and your monitor to disconnect from the internet, thus not performing call forwarding. ...If the WIFI monitor breaks, does call forwarding still work?
No, if the handset is broken, call forwarding won't work either. DuoxMe forwarding service works due to the monitor, which acts as a gateway for incoming calls from the outdoor panel. You may also be interested in: How do I reset the monitor's WIFI ...How do I improve the WiFi coverage of my monitor?
Once connected, if the monitor menu is opened on the monitor, it will show the strength of the WiFi signal in the bottom right. To access this menu, press the MENU button on your monitor. It is recommended to have at least 3 bars for optimum ...How can I see the WIFI coverage my monitor is receiving?
You can check the signal received on your monitor by clicking on the screen and checking the WIFI connectivity icon in the bottom right. In this menu, one of the following WiFi signal strength level icons will be displayed: You need 3 bars of WIFI ...
Find manuals, technical books, tender specifications and much more on our professional website.