[DUOX PLUS] 9985 How do I configure my additional IP camera before connecting it to my 9454 camera interface?
If the IP camera you have received 9985 is not in our kit you will need to activate it and follow the steps below to configure it from your PC.
In this example the factory default IP address of the camera 192.168.1.64 is changed to 192.168.1.205. This change is not necessary if you do not have more cameras or the address is not occupied by another device in your network.
If you have more cameras in your installation you must assign a different IP address to each camera within the same network range.
In this example the factory default IP address of the camera 192.168.1.64 is changed to 192.168.1.205. This change is not necessary if you do not have more cameras or the address is not occupied by another device in your network.
If you have more cameras in your installation you must assign a different IP address to each camera within the same network range.
In 01:23 the IP camera V2 password is now Fermax.25 previously fermax123 or Fermax.123
Related Articles
DuoxMe makes it easier to access your building and home by adding a Tedee lock
The new way to access your home Forget about keys, spare keys and unnecessary hassle. With the integration of Tedee Smartlock + Duox Plus, you can open both the building entrance and your front door using a single system. ? Greater convenience ? ...
Find manuals, technical books, tender specifications and much more on our professional website.