How can I deactivate, change the language or change the volume of the "door open" message?

How can I deactivate, change the language or change the volume of the "door open" message?

To deactivate, change the language or volume of the "door open" message, it is necessary to unscrew the video door panel. On the back, you will find the corresponding potentiometer shown in the following diagram (audio settings and language selection):



The Audio Settings icons refer to the following:



In case you want to deactivate the "door open" message, you need to configure the language selection as follows (63):


You can consult the official technical manuals of the product from our website.
    • Related Articles

    • How can I change the melody of the monitor?

      The monitor allows for selection of different melodies for the panels, the guard unit and the doorbell. You may assign up to 6 different melodies. To change the monitor's melody, press the menu button from the monitor, go to settings and select the ...
    • [DUOX PLUS] Amplifier

      Below you can download the new Duox Plus quick guide in PDF format: 970270Ic Duox Plus System Quick Guide V12_23 970303I DUOX PLUS Installation and Programming Guide V01_24 DUOX PLUS AMPLIFIER Color video amplifier module, to be incorporated in video ...
    • Configuration and setting of VEO monitor functions

      Link to video Learn how to set up and adjust all functions of your VEO monitor, such as call volume adjustment, melody, image capture or the "Do Not Disturb" function.
    • How can I disable the camera LEDs so that they do not light up when I am in a call?

      To change the lighting of the LEDs on the outdoor panel camera, you will need to unscrew it to find the JP1 jumper on the back of the outdoor panel: This jumper needs to be set to LEDS OFF: We remind you that you can consult the official technical ...
    • [DUOX PLUS] Spare part PVT09374 Microphone amplifier CITY

      Step-by-step instructions on how to replace the microphone of a CITY DUOX PLUS amplifier. Remove the front of the board with the help of the three side tabs. Use a flat screwdriver to pry it off, being careful not to deform the aluminium. 2. Remove ...

    Find manuals, technical books, tender specifications and much more on our professional website.

       
      Fermax International Distribution Network.