[CORA] Register and manage cards and key fobs from the CORA panel.

[CORA] Register and manage cards and key fobs from the CORA panel.

The CORA panel includes an Electro Marine reader and can act as a controller for other external readers.

Whether using its own reader or an external reader, you can configure CORA users and register cards and keyrings in two ways:
  1. At the Users menu, either by adding them to existing users or by creating a new user and associating the card with that user. 
 

When you tap the green proximity reader icon, a 30-second timer will appear. During that time, you can swipe your card or key fob over the reader, and it will be added automatically.


  1. From the "Access Control" menu, you can add identifiers individually or in batches. If you choose to add them in batches using the "Add Multiple Cards" option, a timer will appear that automatically refreshes when a card or keyring is swiped and will close if 30 seconds elapse without adding any more identifiers.
Once the identifiers have been added using this method, they are already registered, and the CORA panel will recognize them as valid for unlocking.

From this point on, if you want to manage them, you can go to the directory and use the “Cards Import” option, which will create a user—invisible in the directory—for each identifier, with sequential names. This way, you’ll be able to track which card corresponds to each user and delete it from the system if it’s lost.


We can also edit the information for the users we've created by clicking the "pencil" icon in the Actions section.


As shown in the image above, the user is listed with residence number 000000, the first name “USERNAME” (sequential number), and a similar last name. This allows for quick verification of the users associated with each proximity card registered on the CORA panel.