[CORA] Is the ILOFT phone compatible with the CORA Panel?
We would like to inform you of the incompatibility between CORA panels and iLOFT DUOX PLUS telephones in all their current or future versions.
CORA panel and DUOX PLUS telephones must not be mounted in the same installation.
Related Articles
How can I disable the camera LEDs so that they do not light up when I am in a call?
To change the lighting of the LEDs on the outdoor panel camera, you will need to unscrew it to find the JP1 jumper on the back of the outdoor panel: This jumper needs to be set to LEDS OFF: We remind you that you can consult the official technical ...How can I change the melody of the monitor?
The monitor allows for selection of different melodies for the panels, the guard unit and the doorbell. You may assign up to 6 different melodies. To change the monitor's melody, press the menu button from the monitor, go to settings and select the ...How can I deactivate, change the language or change the volume of the "door open" message?
To deactivate, change the language or volume of the "door open" message, it is necessary to unscrew the video door panel. On the back, you will find the corresponding potentiometer shown in the following diagram (audio settings and language ...[DUOX PLUS] Spare part PVT09374 CITY MICROPHONE SET AMP. DUOX PLUS
Step-by-step instructions on how to replace the microphone of a CITY/SKYLINE DUOX PLUS amplifier. Remove the front of the board with the help of the three side tabs. Use a flat screwdriver to pry it off, being careful not to deform the aluminium. 2. ...S8-S10 Fit tool
1 Introduction In order to make the panels with frame sizes S8 to S10 sturdy and to prevent sinking any module in the central position when pressed. 2 Product description The part, made of 2.5mm stainless steel, will act as a turnbuckle to prevent ...
Find manuals, technical books, tender specifications and much more on our professional website.