[CORA] Installation recommendations for areas with reflective surfaces

[CORA] Installation recommendations for areas with reflective surfaces

Recommendations on Location and Orientation:

  • Whenever possible, install the panel so it is not directly facing reflective surfaces.
  • A slight adjustment to the installation angle can help prevent unwanted activations.

Avoid installing the panel:

  • In front of or next to reflective surfaces such as marble, glass, or glazed doors.
  • Facing another CORA panel located at a short distance.
  • Inside protective enclosures with a glass front.

If environmental conditions cannot be changed:

  • Configure the panel so that the display is activated only by keypad operation.
    • To enable this option, go to the Settings > Display menu and select Activate at "Press key".

Notes
These recommendations help ensure stable display operation and prevent constant and permanent activations caused by reflections or specific environmental conditions.