[CORA] How to configure the CORA system in VILLA MODE and register keypad codes for residents.
Within the webserver we can configure our panel to behave like a single-home panel.
We do this by activating the VILLA MODE option, which we find in the webserver (logging in as installer) of the panel in Settings-CALL
1st Activate the VILLA MODE option and indicate the Duox Address with which we will programme the home terminal or terminals and save.
To generate a call to the home, simply press bell and in this case it will call the terminals configured as 1.
2nd If we want to register keypad codes for each user in the villa.
In VILLA MODE, the panel keypad can be used as an access control for residents who can access the villa/chalet/house/company.
We will make a short press on the X of the panel and we will enter the registered code.
We will register the codes in the following section of the web server.
1- Within ACCESS CONTROL- ACCESS CONTROL SETUP. We will activate Enable Keypad Codes, indicating the Number of digits of 4, 5 or 6. In this case we will use 4-digit codes.
It is important to click on save.
2-We will register the RESIDENTS in the USERS menu in the +NEW USER option. Each one with their access code (this can be the same or different) and we will indicate the same house number and IMPORTANTLY check the tick of Invisible so that the agenda does not appear on the display screen of the CORA panel.
And save.
Related Articles
INTEGRATION Smartlock with DUOX PLUS video door entry system.
Below you will find documentation on how our DUOX PLUS video system can be integrated with different types of SMARTLOCKS. Compatible with Tedee GO and Tedee PRO[CORA] Is the ILOFT phone compatible with the CORA Panel?
We would like to inform you of the incompatibility between CORA panels and iLOFT DUOX PLUS telephones in all their current or future versions. CORA panel and DUOX PLUS telephones must not be mounted in the same installation.[CORA] How to connect an EXTERNAL WG READER or CONTROLLER to the CORA panel.
We see the connection of the MOLEX CN1 which is indicated EXTERNAL READER/EXTERNAL CONTROLLER. The notch at the bottom left of the molex CN1 indicates that it is pin 1. From top to bottom they would be pin 4, pin 3, pin 2, pin 1. Where each pin ...With DUOX PLUS, can I orientate or change the camera angle of the DUOX PLUS video door entry system?
No, the DUOX PLUS video door entry camera does not allow manual orientation or physical angle change. However, it has a wide viewing angle of 100º horizontally and 80º vertically, which provides adequate visual coverage in most installations. If ...With DUOX PLUS, how can I deactivate, change the language or change the volume of the "door open" message?
To deactivate, change the language or volume of the "door open" message, it is necessary to unscrew the video door panel. On the back, you will find the corresponding potentiometer shown in the following diagram (audio settings and language ...
Find manuals, technical books, tender specifications and much more on our professional website.