[CORA] Copy settings between Panels
To export the configuration from one panel to another, follow these steps:
On the old Panel:
- Activate the access point on the board and connect to the web server with installer credentials. If you have any questions, please consult the manual.
- Within the web server, go to the Maintenance > Maintenance section.
- Once in the maintenance section, press the export button in the Panel settings section.
Below is a video illustrating the process.
Once we have located the file with the configuration of the old board, we carry out the following steps:
On the new Panel:
- Activate the access point on the Panel and connect to the web server with installer credentials.
- Within the web server, go to Maintenance > Maintenance section.
- Once in the maintenance section, click on the import button in the Panel settings section and select the file previously generated with the configuration.
With these steps, you can easily export the configuration between boards.
Related Articles
[CORA] Installation of the Desfire Skyline reader ref. 7463 on a CORA S8 panel
We can install the DESFIRE SKYLINE PROXIMITY READER ref 7463 on CORA S8 panels ref 7710. The accessory is included in reference Ref. 7720 CORA Proximity Front Viewer. To do this, we will follow these steps: 1. You need to break the four plastic ...[CORA] How to configure the CORA system in VILLA MODE and register keypad codes for residents.
Within the webserver we can configure our panel to behave like a single-home panel. We do this by activating the VILLA MODE option, which we find in the webserver (logging in as installer) of the panel in Settings-CALL 1st Activate the VILLA MODE ...[CORA] Change of the webserver access password after update
From firmware version 1.04.005 onwards, the procedure for accessing the CORA web server has been modified. Until now, the same installer/administrator code was used both to put the board into Wi-Fi access point mode and to access its settings via the ...[CORA] How to connect an EXTERNAL WG READER or CONTROLLER to the CORA panel.
We see the connection of the MOLEX CN1 which is indicated EXTERNAL READER/EXTERNAL CONTROLLER. The notch at the bottom left of the molex CN1 indicates that it is pin 1. From top to bottom they would be pin 4, pin 3, pin 2, pin 1. Where each pin ...[CORA] FILTER name function in the directory.
FILTER (Restriction of user visibility and access) The FILTER function allows you to control which users can be visible and accessible from each door panel in an access control system. When you activate this option for a user: The ability to call ...
Find manuals, technical books, tender specifications and much more on our professional website.