Can I add a light or a buzzer to be activated by the call of the plate?
No, the see-u kit cannot be extended with light activators or call extenders, they are not compatible. It is only possible to extend more monitors up to a total of 4 including the one in the kit so that the call can reach other points in the house.
Related Articles
Can I add two analogue aerial cameras to my see-u kit?
If you only have one kit, with one outdoor panel, you will only be able to connect one aerial camera as it connects directly to the panel. If you add a second panel ref. 1395, you could also add a second ANALOG PAL camera that would be connected to ...How do I add an additional monitor or board to my see-u kit?
Below you can see how we would add an additional monitor or board. It is allowed to have with the kit up to 4 cascaded monitors including the one in the kit. The intermediate monitors will be configured like this and will be configured in the ...Which door release can I connect to the see-u kit?
The electric lock release must be of low consumption direct current, less than 250mA Fermax recommends ref. 29588 DOOR OPENER 300N-412-S if the grille or entrance door has a bolt entry, you must change the trim plate of the electric lock release and ...Why doesn't my 1392 NO WIFI monitor ring when it receives a badge call?
In installations with only one monitor in the kit, we recommend checking the configuration of the monitor as it should be configured as MAIN. Also, check the MUTE indicator if it is active, the LED indicates that it has been muted. To activate it ...Why doesn't my 1394 monitor ring when it receives a board call?
In installations with only one monitor in the kit, we recommend checking the configuration of the monitor as it should be configured as MASTER. Also, check the MUTE indicator if it is active the LED indicates that it has been muted. To re-activate ...
Find manuals, technical books, tender specifications and much more on our professional website.