The monitor is not responding and the LEDs are flashing, what does this mean?
When you connect the monitor to the WIFI, the monitor will automatically check if there is a new firmware version available for upgrade. This action is automatic and does not require any action.
During the upgrade process, a blue LED will light up and after this, the red power LED will flash, during the final reboot. After powering back on, it will reconnect to the WIFI network it was paired with.
A push notification will appear on your smartphone informing you about the update. The update may take up to 15 minutes, depending on the speed of the WIFI network.
Related Articles
What does the red LED on the monitor indicate?
The red LED on the front of the monitor indicates that it is powered, and will remain on steady. If Do Not Disturb mode has been activated from the monitor, the LED will flash slowly. If the monitor is unprogrammed, the LED will flash fast. If you ...What is Blue by Fermax?
Blue by Fermax is a free Android and iOS app that you can use to receive and answer calls made to your FERMAX video door entry system with DUOX technology. With Blue you can see who is at your door and answer and open it using your phone, no matter ...How do I know that my monitor is set up and ready for call forwarding?
Once paired, a new home that is linked to your Blue account will appear with the name you have just given it. The house will appear with a green signal indicating that the monitor is connected and that the service is active. You can check this by ...Recommended basic WiFi router configuration for Blue
You most likely won't need to make any changes to your WiFi router settings, unless you don't have a 2.4GHz WiFi network set up. If you have questions or prefer not to access your router settings, you can contact your Internet service provider. Check ...How can I pair my DUOX monitor using the app?
Link to video You need to use Blue app to link your WIFI monitor with your user account and connect it to the Internet. This process is called pairing, you can complete it by following the steps in the app. 1. Select add new video monitor from the ...
Find manuals, technical books, tender specifications and much more on our professional website.