At MeetMe, can I see or open the door even if I am not called?
Yes, you can open the door directly from the main view without activating the outdoor panel's camera first. To do this, you first need to add the outdoor's panel as a contact in the app.
To be able to do so, follow the steps below:
1. Wait for a call from a visitor or make the call yourself. Then, in the MeetMe app, go to Call log.
2. In the Call Log, tap the icon to add contact.
3. Add the name of the access to be displayed on the main screen.
From the main screen, the access is now displayed and you can swipe towards the key icon to open the door without video.
Related Articles
[MEET] Connection for door lock
To open the door from your MEET Kit ref. 1506, 1507, or 1508, you have a potential-free contact to open the door depending on the type of door: Door with a latch that has an electric door opener on the frame. There are different formats and they can ...In MeetMe, how can I open a second door?
From the app, it is possible to open a second door in addition to the main door. To be able to use this function, a second auxiliary relay must be connected to the outdoor panel in your facilites (consult your installer). Activate first the auxiliary ...[MEET KIT] Start-up and configuration with the MeetMe app
To start up the MEET Kit ref. 1506, 1507 or 1508, follow these steps: Check that it is installed as shown in the image and that the recommended distances between the switch and the devices are not exceeded If the installation is wired as shown in the ...[MEETME] How to add and set up a home in the MeetMe App
In this article, we explain step by step how to add a home and configure it correctly in the MeetMe app. The steps you need to follow are the following:" Sign up and log in Before you begin, make sure you have an account in the app. If you don’t, ...SIP panel integration: Port configuration with Meet server and door opening with the new MeetMe App
Port configuration with the new Meet server After migrating to the new MeetMe app, with the SIP panel we have to look at which transport protocol they use. With UDP, the port is the same (5060) and just needs to be reset. With TCP (default option), ...
Find manuals, technical books, tender specifications and much more on our professional website.