[AC-MAX] What is a wiegand reader?
It is a reader that allows direct connection with our controllers since it speaks with a standardized protocol compatible with our controller. To these readers we must connect 2 power supply wires + - Vcc in direct current, 2 data wires D0, D1 and 1 or 2 wires for the LED CONTROL, or BUZZER.
Related Articles
[AC-MAX] What maximum distance can I have between the furthest reader and the controller if it is fingerprint or wiegand?
If the reader is an AC-MAX fingerprint reader ref. 5225 this reader is connected to the controller by RS-485, therefore up to 1200m, but additionally, it must be considered that it is also connected by Ethernet, therefore it will have to have a ...[AC-MAX] 5223-5224 Do I need a 4420 ACPLUS door controller to connect a wiegand reader to AC-MAX kit?
Not since the 4420 is exclusive to the ACPlus system and is not compatible with AC-MAX. In addition, AC-MAX allows the direct connection of the wiegand readers up to 4 readers per control unit with 2 or 4 doors.[AC-MAX] 5225 What IP (protection index) does the AC-MAX fingerprint reader?
The AC-MAX fingerprint reader is IP43 (indoors) but if you want to install it outdoors you can do so as long as it is protected.[AC-MAX] 5225 Do we have a desktop reader to register fingerprints in AC-MAX?
There is no exclusive reference for that. It is possible to use the same reference 5225 FPAC-MAX FINGERPRINT READER as our fingerprint reader by adding a 4813 source so that it can be installed next to the PC where the AC-MAX software is for ...[AC-MAX] 5224Can I connect two doors with entry and exit fingerprints and another 2 doors with Wiegand entry and exit reader in a 4-door control panel?
Yes, since different types of readers can be combined in the control panel and it is also within the wiegand reader connection limit, which is up to 4.
Find manuals, technical books, tender specifications and much more on our professional website.