[AC-MAX] 5225 What IP (protection index) does the AC-MAX fingerprint reader?
The AC-MAX fingerprint reader is IP43 (indoors) but if you want to install it outdoors you can do so as long as it is protected.
Related Articles
[AC-MAX] 5225 Do we have a desktop reader to register fingerprints in AC-MAX?
There is no exclusive reference for that. It is possible to use the same reference 5225 FPAC-MAX FINGERPRINT READER as our fingerprint reader by adding a 4813 source so that it can be installed next to the PC where the AC-MAX software is for ...[AC-MAX] What maximum distance can I have between the furthest reader and the controller if it is fingerprint or wiegand?
If the reader is an AC-MAX fingerprint reader ref. 5225 this reader is connected to the controller by RS-485, therefore up to 1200m, but additionally, it must be considered that it is also connected by Ethernet, therefore it will have to have a ...[AC-MAX] ¿[AC-MAX] Can we also offer the switches to connect the control panels and fingerprint readers to the ethernet network?
Yes, Fermax has the references 1586 IP SWITCH 4 PoE PORTS and 1587 IP SWITCH 8 PoE PORTS. One socket or port must be counted for each existing control unit and each 5225 fingerprint reader that we have in the installation.[AC-MAX] Is my 5204 AC-MAX USB reader compatible with DESFIRE identifiers?
No, since the USB reader, just like a RESISTANT would do, only reads the UID of the card, not the code encrypted in the identifier. In the case of DESFIRE identifiers, we can only register the identifiers in AC-MAX either manually with the serigraphy ...[AC-MAX] What is a wiegand reader?
It is a reader that allows direct connection with our controllers since it speaks with a standardized protocol compatible with our controller. To these readers we must connect 2 power supply wires + - Vcc in direct current, 2 data wires D0, D1 and 1 ...
Find manuals, technical books, tender specifications and much more on our professional website.