[AC-MAX] What are the dimensions of the metal boxes of the 2 and 4 door controllers?

[AC-MAX] What are the dimensions of the metal boxes of the 2 and 4 door controllers?

Dimensions Controller 2 doors AC-MAX ref. 5223: 295(V) x 285(H) x 90(D)mm

Dimensions Controller 4 doors AC-MAX ref. 5224: 325(V) x 305(H) x 100(D)mm

    • Related Articles

    • [AC-MAX] Integration of license plate recognition in AC-MAX.

      AC-MAX allows us to open barriers by means of license plate recognition. For integration it is necessary to install special IP cameras with local license plate recognition and wiegand-26 output with SHA-1 protocol. The wiegand output of the camera is ...
    • [AC-MAX] Are AC-MAX controllers powered by PoE?

      No, since they have their own power supply inside the AC-MAX CONTROLLER KIT. If the switches are PoE, they are compatible and work correctly, since they will not supply power to the kit.
    • [AC-MAX] What do I do if the metal boxes do not fit in my location?

      The circuits are on a DIN rail, therefore we could place them in another accommodation on a DIN rail or other types of registers. The source is bolted to the box so the location of the transformer should be found elsewhere.
    • [AC-MAX] 5223 5224 Reset factory defaults AC-MAX 2/4-door kits

      For point 7 1º Install AC-MAX HW 2º Connect to the control panel normally v1.7 without password (without the communication key, as it will no longer have a password when reset). 3º From Tools - establish the communication key 1234, 1234 and check. 4º ...
    • [AC-MAX] Do we have 5 door drivers?

      Not just 2 or 4 doors so what is budgeted is a combination of both 1-5223 (a two door) and 1-5224 (a four door). So I would connect the 5 doors.

    Find manuals, technical books, tender specifications and much more on our professional website.

       
      Fermax International Distribution Network.